cpacled  
Phone : (6638) 570966 to 9 Fax : (6638) 570970
e-mail :   customersvc@cpacasia.com
websentry2
Basic jQuery Slider - Demo
 
Untitled Document
LED LIGHTING
led lighting
led lighting
led lighting
led lighting
FEATURES AND BENEFITS

- Modular Design… Easy to Install.

- Even light distribution…Suitable for work areas.

- Reduces energy consumption by up to 80%

- Expected life span up to 100,000 hours.

- Low maintenance cost.

- No mercury or phosphorescent pollution.

- Shock resistant-suitable for sport areas indoor/outdoor.

- Converts to 12 V.

 
SENTRY INDUSTRIAL 50
 
SENTRY INDUSTRIAL 50 products line has been designed for LOW BAY & HIGH BAY applications as SAP or HQI lamp, from 100W to 400W, substitution saving more than50% of energy. SENTRY INDUSTRIAL 50 use a TIR high efficency optical system (> 93%) to not waste light flux using metal or metalized reflector (efficency < 75%).

SENTRY INDUSTRIAL 50 is composed by a spherical lower case, with optical protecting glass (accessory), used to install the led modules
with maximum power of 30W each, for better electrical and thermal efficency.

The particular design grant a lighting flux maintenance (L70) over 70.000 hours . The optimized heat sinking allow the
installation in high temperature areas.

The silicon lens and the sealed power supply increase the global IP protection factor of the lamp, able to be installed in
heavy dust, or high umidity levels areas.

Suspended installation using the top hanger.
Avaiable Codes
base code led color lm optic finishing power supply power notes
05 - 50w 4000°K 7043lm M medium 3 grey anodized 230VAC 54w class 1 
  5000°K 7043lm 8 diffused        
Technical Specifications
led number & model 3 CREE CXA, each assembled on an anodized alluminium spherical case with maximum power of 30W
luminous flux & CRI lamp lumen flux of 7043lm based on 4000°K/5000°K CRI 70 model of a switched on lamp installed at Ta +35°C. Avaiable HD white light from 2700°K to 6500°K with maximum CRI of 93, for application requiring high color rendering
optical system medium light beam(high bay) or diffused low installation height
avaiable on request photometric data file in EULUMDAT format and technical documentations suitable to size quickly a lighting project
power supply input voltage 110-230vac +/- 10% 50-60hz, over voltage protection till 305vac, class 1(isolation class 2 with earth ground), active >0.9, conversion efficency > 93%
materials & finishing lamp manufactured using an led and lamp support module in anodized alluminium
silicon lenses and resin coated driver
dimensions & weight overall dimensions 46cmx46cm height 23cm
maximum weight 4kg
lifetime L70 (luminous flux not under 70% of initial rate) > 70,000 hours @ Ta < 45°C
power supply > 50,000 hours @ Ta < 40°C
IP & Ta general IP protection grade IP65 
driver IP67
Ta -25°C / +55°C
installation suspended installation using the top round hanger, with (not supplied) chains or cables
equivalent wattage the thermal design and the high optical efficency of SPIRIT 05 is able to give the same lighting performances of a SAP/HQI 150W substituting lamp to lamp
 
Untitled Document

CPAC Asia Imaging Products Ltd
112 Moo 9, Bangna-Trad Km.36,Bangwua, Bangpakong Chachoengsao 24180, Thailand
Fax : (6638) 570970 Phone : (6638) 570966 to 9 e-mail : customersvc@cpacasia.com